Take the Sintech NGFF to M.2 NVMe adapter, and insert it in place of. Unscrew it and remove the drive, setting it aside. If your drive cannot be updated, contact AppleCare for service. In the center of the MacBook Air, there's a Torx screw holding it down. The Apple Support Note on the recall recommends that customers install the MacBook Air Flash Storage Firmware Update 1.1, which will also tell whether the SSD is affected. Upon successful completion, no further action is necessary. Run the update again allowing it to inspect your flash storage drive to install the firmware. Or you use the existing app in /Applications/Utilities if you happen to have it already. with unpkg) and locate the Firmware in the correspoding app. Definitely the second option is the only one that is viable. If this happened, download the update, turn File Vault off (from the Apple menu, select System Preferences, click on Security & Privacy, click on the File Vault tab, then turn File Vault off. Download the EFI Firmware update from Apple, unpack the package (e.g. Purchase a new MacBook or somehow upgrade the storage capacity of this laptop. Of course that only tells you what version is installed, and not what it should be. Note: If you applied this update on OS X Lion v10.7.5 and are using File Vault, the firmware will not update even though you saw a dialog box that told you it was successful. It’s simple to check: use the About This Mac command in the Apple menu, click on System Report and, in System Information, read what it reports for System Firmware Version (in the Hardware Overview). If your drive cannot be updated, Apple will replace it, free of charge. This update tests your drive and, in the majority of cases, installs new firmware to resolve the issue. This update addresses a storage firmware issue that, in rare cases, may cause a system to fail to recover from a crash. This firmware update is recommended for MacBook Air (mid 2012) models.Īpple has discovered that a small percentage of flash storage drives in these MacBook Air models have an issue that may result in data loss. This update is recommended for MacBook Air (mid 2012) models.
0 Comments
Leave a Reply. |